176 More than %s threads have been selected to be modified.
177 Multiple Thread Configuration
178 ThreadMark (TM) is a benchmark that measures hard drive performance using a combination of single and multi-threaded I/O requests typical of desktop Windows (TM) environments.
179 OK
180 Cancel
181 It measures two key aspects of hard drive performance: the data transfer rate and percent CPU utilization.
182 ADAPTEC, INC.
\nTHREADMARK (TM) SOFTWARE LICENSE
\n
\nCAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. BY USING ANY OF THE
\nADAPTEC SOFTWARE, YOU AGREE TO BE BOUND BY THESE TERMS AND CONDITIONS.
\nIF YOU DO NOT AGREE TO THESE TERMS AND CONDITIONS, DO NOT USE ANY OF THE
\nSOFTWARE.
\n
\nThis License grants you a non-exclusive license to use the Adaptec
\nSoftware and related documentation ("Software") on the following terms
\nand conditions:
\n
\n1. License. You may: (a) use and (b) copy the Software in machine
\nreadable form provided you reproduce Adaptec's copyright notice and
\nproprietary legends.
\n2. Restrictions. The Software contains trade secrets and in order to
\nprotect them you may not decompile, reverse engineer, disassemble, or
\notherwise reduce the Software to a human perceivable form. YOU MAY NOT
\nMODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN, RESELL FOR PROFIT, OR CREATE
\nDERIVATIVE WORKS BASED UPON THE SOFTWARE OR ANY PART THEREOF.
\n
183 ThreadMark is completely device independant, and can be used with EIDE or SCSI drives.
184 3. Publication of Results. Whenever published or preserved, results
\nobtained by this utility must be identified with the number of the
\nversion used.
\n4. Ownership. The Software is copyrighted by, proprietary to and a trade
\nsecret of Adaptec. Adaptec retains the title, ownership and intellectual
\nproperty rights in and to the Software and all subsequent copies
\nregardless of the form or media. The Software is protected by the
\ncopyright laws of the United States and international copyright treaties.
\nThis License is not a sale of the Software.
\n5. Termination. This License is effective until terminated. This License
\nwill terminate automatically without notice if you fail to comply with
\nany of the provisions. Upon termination you shall destroy all copies of
\nthe Software including any partial copies.
\n6. Support. ADAPTEC IS UNDER NO OBLIGATION TO PROVIDE SUPPORT FOR THIS
\nSOFTWARE.
\n
185 7. Disclaimer of Warranty. YOU ACCEPT ALL RISKS WHICH MAY ARISE FROM
\nYOUR USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO ERRORS IN
\nTRANSMISSION OR CORRUPTION OF EXISTING DATA OR SOFTWARE. ADAPTEC MAKES
\nNO WARRANTIES, EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIMS ANY
\nWARRANTY OF NONINFRINGEMENT OF THIRD PARTIES' RIGHTS, WARRANTIES OF
\nMERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE. Some states do
\nnot allow the exclusion of implied warranties or limitations of how long
\nan implied warranty may last, so the above exclusion may not apply to
\nyou. You may also have other rights which vary from state to state.
\n
186 8. Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL
\nTHEORY, TORT, CONTRACT, OR OTHERWISE, SHALL ADAPTEC OR ITS SUPPLIERS OR
\nRESELLERS BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL,
\nINCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT
\nLIMITATION, DAMAGES FOR LOSS OF PROFITS, DATA, GOODWILL, WORK STOPPAGE,
\nCOMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES
\nOR LOSSES, EVEN IF ADAPTEC SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OF
\nSUCH DAMAGES.
\n9. Export. By using the Software, you acknowledge that the laws and
\nregulations of the United States restrict the export and re-export of the
\nSoftware. Further, you agree that you will not export or re-export the
\nSoftware or media in any form without the appropriate United States and
\nforeign government approval.
\n
187 10. U.S. Government Restricted Rights. If the Software is acquired under
\nthe terms of a GSA contract, use, reproduction or disclosure is subject
\nto the restrictions set forth in the applicable ADP Schedule contract.
\nIf the Software is acquired under the terms of a DoD or civilian agency
\ncontract, use, duplication or disclosure by the Government is subject to
\nthe restrictions of this License in accordance with 48 C.F.R. 12.212 of
\nthe Federal Acquisition Regulations and its successors and 48 C.F.R.
\n227.7202-1 of the DoD FAR Supplement and its successors.
\n
188 11. General. You agree this is the complete agreement concerning this
\nLicense. In order to amend this License, a writing executed by both
\nparties is required. You assume full responsibility for the legal and
\nresponsible use of the Software. This License shall be governed by
\nCalifornia law as such law applies to agreements between California
\nresidents entered into and to be performed within California, except as
\ngoverned by Federal law. Should any provision of this License be
\ndeclared unenforceable in any jurisdiction, then such provision shall be
\ndeemed to be severable from this License and shall not affect the
\nremainder hereof. All rights in the Software not specifically granted in
\nthis License are reserved by Adaptec.
\n
\n
189 Refer to the documentation for a complete description of ThreadMark's operation and methodology. Visit the Adaptec ThreadMark web site: http://www.adaptec.com/ThreadMark.html
190 ThreadMark is ready to measure I/O performance. Please\nclose all other applications and do not disturb the system\nwhile it is running. ThreadMark will run for approximately\none hour.
191 If you have any questions concerning this License, contact
\n
\nAdaptec, Inc.
\nLegal Department
\n691 South Milpitas Boulevard
\nMilpitas, California 95035
\n
194 +
197 ~
199 -
202 *
204 N
205 R
206 S
207 W
208 B
209 T
210 %c %-.15s %s%s%s %-.15s %s%s%s%s %5lu
212 Memory
214 %-15s
216 %-15s %c%c%c%c
217 %-15s
218 %-15s %c%c%c
219 %6lu %5.1lf %5lu %6.2lf%s\n
220 Error - unable to allocate memory for buffer used to create file ThreadMark Message
221 Unable to create %s (ThreadMark message)
222 Creating %s...
223 Beta version of ThreadMark has expired shutting down...
224 199609
225 Time [seconds]
226 Thread %d Instantaneous Activity [Calls/sec]
227 Thread %d Cumulative Activity [Calls/sec]
228 Thread %d Instantaneous Throughput [MB/sec]
229 Thread %d Cumulative Throughput [MB/sec]
230 Total Instantaneous Activity [Calls/sec]
231 %s
232 0
233 10
234 75
235 155
236 190
237 215
238 BMark.wsr
239 [ThreadMark Script File]
240 [ThreadMark Parameters]
241 A one-time CPU baseline measurement will be performed when \nthe OK button is clicked. This measurement is used in benchmark\ncalculations. To ensure accurate results, please make sure\nall other applications are closed before running the baseline\nmeasurement.
242 Performing one-time CPU Baseline... Please wait...
243 Error - Parameter file %s was not found.
244 Cancelling the test will invalidate the current results.\nAre you sure you want to cancel the test ?
245 \\.\PhysicalDrive
246 abrwcach.dll
247 Harddisk
248 A maximun of 4 drives may be selected for bench mark testing.
249 Drive %s does not have the required free space to run the bench mark tests.\nThe amount of free space available is %ld meg.\nThe amount of free space required is %ld meg.
250 At leat one test drive must be selected before testing can begin.
251 Average CPU Utilization was %2.2f percent.\n\n
252 \nThreadMark Score was %3d.\n
253 Data Transfer Rate (MB/sec) was %2.2lf.\n
254 ThreadMark Results
255 Error creating file %s.\nTest results will not be saved.
256 prnfile.txt
257 Error creating temporary print file.\nTest results will not be printed.
258 ThreadMark text files (*.txt)|*.txt||
259 ThreadMark text files (*.txt)|*.txt|ThreadMark Reports (*.rpt)|*.rpt|All files (*.*)|*.*||
260 Performing test %d of %d
261 An error was encountered while trying to display the FAQ.\nThe FAQ will not be displayed.
262 notepad.exe faq.txt
263 A one-time CPU baseline must be performed. This measurement\nis used in some calculations of the benchmark test.\nTo ensure an accurate measurement, please make sure that all\napplications have been closed. An invalid baseline may yield\ninaccurate results.
264 System Information\n------------------\n
265 System Information\n------------------\nOperating System : %s\nWindows version : %s\nTotal physical memory : %ld (KB)\nPage size : %ld\nProcessor class : %s\nNumber of processors : %ld\n\n\nUser Supplied Information\n-------------------------\nEnter information here.\n(Ctrl+Enter to add a new line)\n\n\n
276 There is not enough free space on the selected drives to run the test.\nPlease free additional space or select other drives to continue.
277 Select drives to be tested.
278 ThreadMark (TM) Version %d.%d\n
279 System Information\n------------------\nOperating System : %s\nWindows version : %s\nAdditional OS information : %s\nTotal physical memory : %ld (KB)\nPage size : %ld\nProcessor class : %s\nNumber of processors : %ld\n\n\nUser Supplied Information\n-------------------------\nEnter information here.\n\n\n
300 %sPage 1\n
301 %s%s\n\n\n
302 Thread Source Flags Destination Flags #Bytes Time CPS MB/sec\n
326 \nAverage CPU usage during the test was %ld%c\n\n
327 %sThreadMark Script Summary Report%s%s
328 %s================================%s%s
329 %sPage 1
330 %2d %s
392 Total Cumulative Activity [Calls/sec]
393 Total Instantaneous Throughput [MB/sec]
394 Total Cumulative Throughput [MB/sec]
395 Instantaneous Idle Thread Rate [Passes/sec]
396 Instantaneous CPU Usage [%]
397 Cumulative CPU Usage [%]
398 %sThreadMark Summary Report%s%s\n
399 %s=========================%s%s\n
31446 Failed to find all required entry points in library %s. Please ensure that the latest version is installed.
31447 Report filename extensions exausted. No script summary report will be generated. Continue anyway?
31448 Unable to create script summary report. Continue anyway?
31449 Warning - no valid parameter (.tio) files found in script file.
31450 Error - unable to open %s.
31451 Error - %s is not a valid ThreadMark file.
31452 Report was sent to the printer.
31453 Error sending report to the printer.
31454 Error - unable to allocate memory for thread data buffer.
31455 Error - this option is only supported in operating systems using the Windows 95 shell.
31456 Are you sure you want to delete the selected %s?
31457 CPU baseline test has not been run.\nTo ensure an accurate estimate of CPU usage, we will do it now.
31458 Error - you must define two or more threads.
31459 Error - not enough free disk space to create test file(s).
31460 Error - unable to lock memory for log file information. Continue?
31461 Error - unable to allocate memory for log file. Continue?
31462 Warning - the log is full. I/O will continue, but nothing more will be saved in the log.
31463 Error - log filename extensions exausted. No log file will be generated.
31464 Error - could not create log file %s.
31465 Error - report filename extensions exausted. No summary report will be generated.
31466 Error - could not create summary report file %s.
31467 Next three strings must have sequential IDs.
31468 Time measurement being done with the high performance counter, which has a resolution of about 1 microsecond. \n\nAPI: QueryPerformanceCounter( ).
31469 Time measurement being done with the multimedia timer, which has a resolution of about 1 millisecond. \n\nAPI: timeGetTime( ).
31470 Time measurement being done with the operating system clock, which has a resolution of about 10 milliseconds. \n\nAPI: GetTickCount( ).
31471 Buffer Size Less than sector size on %s file, processing will fail unless changed.\nIt must be equal to or greater than sector size when no buffering selected.
31472 License agreement was sent to the printer.
32771 Add another I/O thread.\nAdd Thread
32772 Delete the selected I/O thread(s).\nDelete Thread
32773 Start test.\nStart test
32774 Stop test.\nStop test
32775 Delete all output files written by I/O threads.\nRemove Test Files
32776 Change extensions automatically when I/O stops.\nBump on "Stop"
32777
32778 Delete output files automatically when I/O stops.\nRemove on "Stop"
32779 Generate new log- and report-file extensions to avoid over-writing.\nBump Filenames
32781 Displays help contents\nHelp Contents
32782 Abort script process.\nStop Script
32783 Create read file(s)\nCreate Read File(s).
32784 Define ThreadMark Options\nOptions...
32785 Start script process.\nStart Script
32795 Establish CPU usage baseline.\nCPU Baseline
32796 Make sure no other applications are active, then push the "Start Test" button to begin the CPU measurement.
32797 CPU measurement is complete.
32806 Change the parameters for an I/O thread.\nModify Thread
32808 View system parameters.\nSystem...
32810 View results saved in file\nView results
32811 New Script File.\nNew Script
32812 Open Script File.\nOpen Script
32813 Save Script File.\nSave Script
32815 Add Parameter File to Script.\nAdd WIO
32816 Delete Parameter File from Script.\nDelete WIO
32817 Close Script File.\nClose Script
32819 Move file down the list.\nMove File Down
32820 Move file up the list.\nMove File Up
32826 Frequently asked questions
32827 View saved results
32828 View the license agreement.
32829 Change drive cache
57344 ThreadMark
57345 Select drives to test from the list.
57600 Create a new parameters file.\nNew
57601 View results saved in file.\nView Results
57602 Close the active parameters file.\nClose
57603 Save the current results to the default report file.\nSave
57604 Save the current results with a new file name.\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the current results.\nPrint
57609 Display full pages\nPrint Preview
57616 Open this parameters file.
57617 Open this parameters file.
57618 Open this parameters file.
57619 Open this parameters file.
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select everything in sight.\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save parameters.\nExit
57666 Lists Help Topics\nHelp Index
57669 Displays help for the button, menu, or window you click\nHelp
57670 Displays help for the current task or command\nHelp
